|
Onsrud Cutters |
|
Beckwith Decor Products |
|
For more info: |
|
Beckwith Decor Products - Onsrud Cutter Distributor. |
|
Home |
|
Products/Gallery |
|
Contact Us |
|
BDP Cutters |
|
3D Cutting/Catalog |
|
Wood Grilles |
|
Double Flute Spiral Upcut - 52-200 Series
Very good general purpose tool for soft or hardwood materials. Available in Upcut (52-200) or Downcut (57-200)
|
|
Compression design for fast feed rates and optimum edge finish on both sides of laminated materials. 60-100SE Single Flute SC Compression 60-100DE Double Flute SC Compression |
|
Wood Routing Tools |
|
Double Flute Chipbreaker Finisher - 60-300 Series
Faster feed rates than conventional two flute with a smooth finish Available as Upcut or Downcut |
|
Super O - 64-000 / 65-000 Series
Polished flute general purpose tool for wood, plastic, aluminum and solid surface. Downcut (64-000) Upcut (65-000)
|
|
Plastic Routing Tools |
|
Single Flute Downcut Spiral O Flute 62-700 Series Designed to provide smooth finish in hard plastics and soft plastics
Single Flute Upcut O Flute 63-700 Series Designed to provided smooth finish in hard and soft plastic |
|
Double Flute Upcut Spiral O Flute 52-600 Series Low helix geometry designed to cut soft & hard plastic with a smooth finish and upward chip flow.
Double Flute Upcut Spiral O Flute 52-700 Series High helix geometry designed to cut soft & hard plastic with a smooth finish and upward chip flow. |
|
Single Flute Straight 61-000P Series The straight O flute geometry is designed to cut hard or soft plastics with a neutral cutting action
Double Flute O Straight 56-600 Series The straight O flute geometry is designed to cut hard or soft plastic with a neutral cutting action. The two flutes allow for a faster feed rates and smoother finish |
|
Super O - 64-000 / 65-000 Series
Polished flute general purpose tool for wood, plastic, aluminum and solid surface. Downcut (64-000) Upcut (65-000)
|
|
Engraving & V-Bit Tools |
|
Engraving Tools - 37-00 / 37-20Series
Solid Carbide 30 & 60 degree engraving tools with a wide range of tip sizes for wood, plastic, aluminum and solid surface
|
|
Double Flute V-Bit Tools - 37-50 / 37-60 / 37-80 Series
Solid Carbide & Carbide Tip 60 to 140 degree designed for V grooving or bevel cutting |
|
Metal Routing Tools |
|
Single Flute Downcut Spiral O 62-600 Series High speed cutters for machining aluminum sheet material
Single Flute Upcut Spiral O 63-600 Series High speed cutters for machining aluminum sheet and block material |
|
Single Flute Solid Carbide Straight - 61-000 Series
Designed to combine the fast free cutting of O flute geometry with the tool life available from solid carbide particularly in small diameters. |
|
Collets & Accessories |
|
Welcome to the new Onsrud cutter section Please note some orders may ship direct from the factory therefore we have a $50.00 minimum per order for this section.
Don’t see the cutter number you use or need ? Send us an email with the number & quantity for a return quote & link to the order cart. Shipping for the Onsrud cutter section will be either USPS priority or UPS flat rate Overnight or Next Day services are currently not available for this section. Shipping of all cutters is FOB |
|
Super O - 64-000 / 65-000 Series
Polished flute general purpose tool for wood, plastic, aluminum and solid surface. Downcut (64-000) Upcut (65-000)
|
|
Double Flute Upcut Spiral Ball Nose- 52-200B/BL Series
Designed for carving and modeling operations. Their improved tip geometry gives a superior cut compared to most ballnose endmills. |
|
Solid Carbide Tapered Tools 77-100 Series
Ball nose available with a variety of taper angles. The tools are designed to produce a good edge finish in a wide variety of materials. Wood, plastic and aluminum
|
